How To Upload A Program From Memory Mori Seiki

I know from feel that it is very easy to lose all programs from a machine. At that place will always be someone who presses the buttons on the automobile faster than reads and thinks. Information technology is a pity if we lose skillful, well-run programs, in which we put a lot of work. And so it's worth to systematically download them. Of form, transfer the other mode, i.eastward. to the CNC machine, is besides a fundamental result and today it will be well-nigh the transfer of programs both ways in several ways.

Some preparation

To transfer some data, of class, we demand information carrier – information technology can exist a pendrive, PCMCIA carte, network, etc. To use the advisable data carrier, it is necessary to set the parameter, which was mentioned HERE.

Downloading a program from a CNC machine to a data carrier, in this case a LAN – step by step

Method on "basic" Fanuc without Manual Guide i.

We switch to EDIT editing mode and enter the program carte PROG.

So press the buttons 1 after some other Plan, FOLDER and (OPRT).

We are now in the machine'southward memory and we have a preview of the programs there. Currently read is marked with "@". To download the plan to the information carrier connected to the automobile (in this case, the LAN) select F OUTPUT.

And now the download process. Beginning, enter the name of the file nether which we want information technology to exist saved. The file name does not have to exist the same as current. It volition be identified after the "Number O" as shown on the graphic below. I choose to utilize TEST_SIEC and press EXECUTE. If yous succeed, the proper noun will announced in the F NAME field every bit beneath, eventually a message will pop up.

Now we give the number "O". His number / proper name in the auto'due south memory. And now it is important that nosotros give this number without the letter "O" fifty-fifty though information technology is in this form in the auto'southward memory. The letter "O" will not be read. They must exist all numbers. So if nosotros accept O0250 then enter 0250 and printing EXECUTE. If successful, the name will announced in the field O NO. as beneath.

We can check it by selecting DEVICE CHANGE and then EMBED ETHER

Of course, the whole procedure looks similar for another data carrier.

Uploading a programme to a CNC auto from a data carrier, in this case a LAN network – step past step

Method on "bones" Fanuc without Manual Guide i.

We switch to EDIT editing mode and enter the program carte PROG.

And so press the buttons one after another PROGRAM, DIRand (OPRT).

We are now in the car's memory and we have a preview of the programs at that place. Currently read is marked with "@". To download the program to the data carrier continued to the automobile (in this case, the LAN) select DEVICE CHANGE and then EMBED ETHER.

Then, to upload the plan to the machine, select F INPUT.

Offset enter the file name nether which it is saved. Our example is TEST_SIEC. Press EXEC. If successful, the proper name will appear in the F NAME field as below, otherwise a message will pop up. Now nosotros give the number "O". His number / name in the machine's memory. And now information technology is important that we give this number without the letter "O" even though it is in this form in the automobile'southward memory. The letter "O" volition non be read. They must exist all numbers. The 2nd of import thing – start check which number in the auto's memory is costless. In our is 0250 and then we enter 0250 and press EXEC. If successful, the proper name volition announced in the field O NO. as below. Finally, nosotros confirm the F GET.

Nosotros get to the machine's memory by selecting DEVICE Change and then CNC MEM.

Warning! The program will be automatically selected as the electric current i. Keep this in heed, because in this case pressing the light-green push at the settings of the previously selected program will cause a collision.

Downloading the program from the machine to the data carrier in the Manual Guide i

In EDIT editing way, go to O LIST (program listing).

We become to our information carrier (card or pendrive, depending on what nosotros have set in the parameters) via Yard Card. Then choose OUTPUT.

Use the arrows to position the cursor on the program you want to download. In our instance, this is SAMPLE. We choose OUTPUT.

A window appears in which we tin change the file name and confirm again past OUTPUT.

At the bottom of this window you can see how the bytes "slider", and after a while the window disappears and the main message is "COMPLETED OUTPUT PROGRAM".

Nosotros tin download another programme in the aforementioned way or get out this carte du jour by selecting Render.

Uploading the program from the data carrier to the machine in the Manual Guide i

In EDIT editing manner, get to LIST (programme list).

Nosotros get to our information carrier (carte du jour or pendrive, depending on what we have set in the parameters) via KAR.PM.

We have 2 options to choose from. INPUT where it reads the number O from the program, just then it may turn out that the machine is already decorated. I recommend the second option WPR 0. Where we give the program number ourselves. We have to ready ourselves on the file nosotros want to upload. This time we "tire" the file called "TEST".

The window for loading the plan into the CNC machine appears. We requite the number "0250". Only numbers, without the alphabetic character "O".

At the bottom of this window you tin run into how the bytes are "running", and after a while the window disappears and the main message is "Plan LOADING COMPLETED". Our plan should already exist in the automobile'due south retentivity. Nosotros'll see it leaving the carte past selecting BACK.

Fill-in of all programs

If the machine is operated by several employees, yous may want to dump all programs from time to fourth dimension. Merely a moment of inattention on the "dark spotter" and you tin can delete all memory.

If you lot practise non want to rip individual programs (which is a very reasonable selection), yous can do information technology quickly in the Manual Guide i. To exercise this, in EDIT editing manner, get to LIST (program list) – very similar to saving a single programme.

We get to our data carrier (carte or pendrive, depending on what we have set in the parameters) via KAR.PM.

We choose what nosotros want to do – salvage to data carrier SAVE.

At present nosotros choose to download all programs by pressing ALL.

We can change the file name or go out it automatically given. Nosotros confirm SAVE.

Such a file can be opened in Notepad or Wordpad. If there are a lot of programs, it looks rather cluttered, but the plus is that the whole task does not have much time and you tin always find the needed program by name.

Skilful manners

Systematically downloading programs is definitely a practiced habit. It will be appreciated by anyone who has lost data forever. I recommend keeping the files in ii places. It is certainly non a expert idea to go along them only on the carte du jour or wink bulldoze through which nosotros ude to download the files. It's all-time to keep the data on your computer. Data carriers "like" to get damaged or lost 😉

Source: https://e-cnc-art.com/fanuc-simple-instruction-for-files-programs-transfer/

Posted by: primefento2000.blogspot.com

Share this post